New Filippi Fin
Seen at the Banyoles World Cup 2009
Any Comments???
Wednesday, May 27, 2009
Monday, May 18, 2009
Developing British Rowing Technique
Developing British Rowing Technique
ARA Sep 07
-----------------------------
ARA Sep 07
-----------------------------
Thursday, May 14, 2009
Romanian Model of Talent Identification and Promotion
FISA Coaches Conference 2001 Bucharest Romania
---------------------------------
Premises
In Romania, sport certainly belongs to the national culture. Elite sport used to be and still is considered an important means of expression, a virtue and a token of national pride.
At the Summer Olympic Games of the last decades, Romania achieved quite good results, being ranked 13th according to an OG all time unofficial classification.
At the last edition of the Olympic Games in Sydney 2000 with 26 medals (11 Gold, 6 silver, and 9 bronze), Romania was ranked 11th in the world.
Out of these, 3 gold medals were won by the feminine rowers. Please consider that this result made our country be the first in rowing in these Olympics!
This is why this model was selected for today’s presentation.
Our position on the identification of talents and selection in female rowing
The repeated successes of Romanian feminine rowing were also a consequence of an appropriate selection system.
To remain competitive in world confrontations, steps must be taken to extend the area of selection system.
In our view, we think favorable to perform a post-puberty identification, in a period of life when most of the morph, functional and psychological indicators are settled.
The selection models are continuously analyzed in parallel with the best women rowers in the world.
Selection criterions
In the first stage of selection, we choose to work with the help of the following criterions:
The health condition
The functional state of the body
The physical (motric) capacity
The psychological capacity
The somatic development and state of nutrition
3.1 The health condition
The condition of health, is an eliminatory criterion, at all stages of the section, in two typical situation:
- If it is dangerous for the anatomic integrity or even the athletes life
- If is becomes a performance limitation factor
3.2 The functional state of the body
Here we would be interested in the global functional integrity (endocrine, metabolic, hemetalogical, (heart) cardio-respiratory). Practically we are aware that the cardio-respiratory system would most easily adapt to physical strain.
The initial exam should possibly also contain the following functional tests:
- Pashon-Martinet test
- Astrand test
- Spirometry – vital capacity measurement
3.3 The physical capacity (motric capacity)
The internal and external factors have a life long action on physical capacity. The main qualities necessary for the performance rowers are:
- The endurance, cardio-respiratory resistance to long term efforts
- Local muscular resistance in force regime
- Mobility of the coxofemural and talo-crural articulation
- The skill (sense of equilibration and coordination of arms and legs)
3.4. The psychological capacity
The success in rowing is determined as well by the level of development of the traces to reflect the psychological and neuroendocrine profile.
The psychological qualities of future rowers should be dominated by strong will, expressed by perseverance and determination
Also, important is the adaptability to monotonous, often repeated activities as well as the conscientiousness to struggle to come as close to perfection as possible.
3.5 The somatic development and state of nutrition
The somatic development and state of nutrition have always been important criterion in rowing. Here is the evolution of the main selection models for the women in rowing and some consideration concerning them.
3.5.1 The Indicator of Segmentary Ability (I.S.A)
Dr O Popescu elaborated this indicator in the decade 1965-1975. The indicator wad established by taking into consideration six dimensions, four unperfectible and two perfectible ones, namely
3.5.1.1 Stretched height (face to the wall, heels to the floor, arms up over the head)
3.5.1.2 Arms amplitude (face to the wall, stretched at shoulder level)
3.5.1.3 Trunk Height (sitting position, back to the wall, to shoulder level)
3.5.1.4 Legs length (sitting position, back to the wall, feet plant in 90 degrees, to the heels)
3.5.1.5 Bideltiodian diameter (shoulders width)
3.5.1.6 Crouching surplus mobility
Much attention is paid to the perfectible dimensions, imposed by short rails and rowing technique suggesting the balance of the trunk in attack and offcome.
3.5.2 The Rowers Morphological Indicator “R.M.I.” Romanian “I.M.Ca”
This indicator was worked out by Prof C Radut and became operational in the years 1975-1980. The indicator was based on seven measurements, out of which four were unperfectible and three perfectible. The third perfectible dimension was added to the O. Popescu model and was namely:
3.5.2.7 The rowing specific amplitude (crouching surplus mobility + leg length) R.M.I. = The sum of the seven measurements in cm, (the higher the total sum, the more segmentary appropriate is the subject considered for the practice of high performance in rowing)
3.5.3 The Morphological Model
Between 1982-1995 Prof C. Florescu and Prof V. Mociani have proposed an operational model which included 4 measurements, 3 imperfectible and one perfectible:
Height stature
The arms amplitude
Stretched height
The weight
- the value of the model for each parameter taken separately, represent 100%
- The real value of each parameter is transformed in percentage according to the model
- (a+b+c)% / 3 = the value of stature dimension, genetically conditioned and thus perfectible.
- The arithmetic mean is usually calculated expressing in percentage, the relation between the value of dimensions in stature and appreciation of the state nutrition result an integral parameter of physical development.
Mathematically this could be expressed as follows:
(a+b+c) / 3 + d] : 2 = [(98,89 + 98,91 + 101,74) / 2 + 96.15] / 2 = 98%
This model brings in weight, considered by the authors as relevant according to the principle of “mass rows the boat”.
The height appears like another new element, but rather esthetically, as it does not influence considerably rowing movement as one is inclined to think. Could there be a contribution of the necks length and head dimension? This is still to be checked.
The perfectible parameters become less important due to the possible changes in boat construction (like changeable lengths of rails, changing angle of the shoes) as well as the general growth of rowers height.
3.6 Control norms and standard system
The control norms and standard system must be in correlation with the rowing particularity of the effort.
For an initial selection in rowing the following events have been recommended by specialists:
- From stand jump in long
- From stand jump in high
- Horizontal rowing (from facial lie down on a board 4cm thickness, it will suspend at the end to 1m height. The arms stretched keep a 15-20kg dumbbell. The arms bend and stretch for 1 – 4 minutes.
- Genuflection with a dumbbell on the shoulders / relating kg and time
- Trunk abdomen (from lying to sitting position)
- To continue to hang with stretched arms
- To continue to hand with stretch arms
- 1200m to run
- 1000m rowing on ergo
- Equilibrium on a bottle
However, I observe that there is a weak correlation between the results in these initial tests and high performance in the future. If just the quite poor result in the primary and secondary sections achieved by of the best rowers (Elana Horvat Florea, Adriana Cheariu bazon, Doina Ignat, Viorica Susanu, Georgeta Damian, Viorica Susanu, Aurica Chirita) had been taken into consideration, we would have had with four Olympic rowing champions less.
So it is not possible to assert that we are aware of methodology of identification and selection of talens that may satisfy all exigencies. The process of selection remains a desiratum still watching for solution.
The sooner, the better!
The practical revivers selection conclusion from practice.
Selection is an evolving process, essentially relaed to somatic growth, functional and psycho-motor development.
The eliminatory selection system is not the most concluding one.
During the training process after a period of preparations the young debutant rowers, initially unsuitable, can register a remarkable qualitative progress, often taking advantage over those who had been predicted a brilliant sports career.
In principle, a small number of tests are preferable to an overloaded and sophisticated package of tests, which will make selection even more difficult and rather create confusion than enhance degree of certainty.
This is why during the practical identification and selection campaign, operated only with two segmentary measurements: stretched height (over 224cm) and amplitude arms (over 178cm).
This minimal selection model has been confirmed by praxis. It thought us that no young lady should be eliminated who is promising and could in future become an Olympic medalist. As an example please observe the segmentary values of our Golden Ladies at Sydney 2000.
All young female rowers who are healthy, preset minimal segmentary values and wish to practice rowing as a sport, should be admitted to take part in the second phase of selection.
A super motivated athlete can compensate many of the effort or somatic demands.
The mobilization of the available neuro-psychological capacity is directly related to the level of motivation. During the training, the capacity of the young female rowers to become high performance athletes will be achieved.
Ultimately it depends on the “TALENTED” young, promising lady athlete how she manages to coordinate her social activities (school, family, professional) so as to succeed in dedicating rowing the time budget required by more and more demanding and challenging conditions.
Wednesday, April 1, 2009
Applying Biomechanics to Improve Rowing Performance
Applying Biomechanics to Improve Rowing Performance
By Peter Schwanitz (GER)
Translated from German by Lena Baden and Fred Kilgallin
From FISA Coach Vol 2 No 3 Summer 1991
If you analyze the average boat speed of all winners of the men’s Olympic Finals (except the 4x) from 1948 (London) to 1988 (Seoul), it is clear that from one Olympic Games to the next, the average boat speed over the racing distance has increased by 1.3 percent.
It is interesting that the development in the average 1st place time corresponds to the relative development in the single sculls. From this one may cautiously draw conclusions about the development of the individual performance.
If this period of time is divided then (see doted lines in Fig 1) from 1948 (London) to 1968 (Mexico) the first place times in an Olympic cycle improved o average 1.9 percent. Winning times in the period since 1968 have improved at a rate greater than the previous period.
The result is that boat velocity, as a mean value for the Olympic winners of all boat classes has increased on average by 1.9 percent in an Olympic cycle. The relationships in velocity between boat classes (mean values) of the winners have stabilized (see Table 1).
Question 2: How are the racing performances in the Olympic cycles of the 1992 and 1996 likely to develop?
Future increases in speed over 2000m have been calculated based on improvements in performances. It should be noted that weather is included as an “average condition”. Therefore the expected improvement implies “average” weather conditions (i.e. calm, small waves etc). For example, for the three boat classes 1x, 2-, and 8+, the improvement in the racing time and the boat speed in the cycles of 1992 and 1996 are clear in Table 2.
Question 3: How are the key technical parameters likely to change in the cycles 1992 and 1996?
Assuming constant stroke rate in the three selected boat classes, the Olympic winner in 1992 and 1996 will have to:
- educe the total number of strokes in the race
- increase the propulsion per stroke in comparison to the winner of 1998 ad 1992 (see Table 3a and 3b)
Assuming constant propulsion in the three boat classes, stroke rates must increase.
Now it is interesting to see the consequences of the probable quantitative improvement of important rowing technique parameters and their relative percentage changes (see Table 4). These data were obtained from measurements of the former East German National Team.
In the three boat classes the highest percentage rates of increase in the realized average performance (P) on the inboard (PIH) are shown for:
- a rowing cycle (PIHZ)
- The effective drive (PIHEF) in the rowing cycle.
The product of the factors “force on the inboard or inside lever” (FIHEF) and the “velocity of the inboard or inside lever” (VIHEF) with the mechanical performance of the inboard show a minor rate of increase within an Olympic cycle.
In general it should be noted that the increase in boat speed puts demand on the athlete to exert more power on the inboard and to attain a higher velocity on the inboard.
Applying Interdisciplinary Contributions to Improve Performance
The definition of biomechanics can be described as the effects of mechanical laws on and in the living organism and their mechanically measurable reactions of the organism to these effects.
Thus biomechanics has its basis in both the physical and biological sciences. Therefore, one should not depend solely on mechanical findings to determine how to achieve competitive goals, (victory, bets possible result, faster, etc)
This knowledge must be translated for use in interdisciplinary synthesis and an application oriented training plan. The following four questions and their answers attempt to substantiate this claim.
Question 1: What are the possibilities and limitations of the contributions of biomechanics to the sport of rowing?
The essential focus of biomechanics in rowing has and always will be rowing technique
Most objectives of biomechanical research are to explain the propulsion-causing powers and accelerations of the rowing stroke during competitions, both in theory and in practice. This research also tries to explain the effects of the development of equipment.
Theoretically explained biomechanical knowledge and the empirical findings that create successful rowers are the bases for forming a technical concept. The application of the concept has contributed to the improvement of rowing performance.
The biomechanics of athletic movements in the endurance sport of rowing can improve performance, especially if it considers biomechanical/energetic and biological/energetic interactions. The task in this connection is:
- to investigate the movement sequences during competition and training in order to explain those mechanical causes that influence the biological/conditional effects;
- To develop rowing technique as a biomechanical solution process that can be applied to the effective biological/energetic development in training as well as result in higher speed during races.
It is important to develop and identify rowing technique from a biomechanical perspective, which makes it possible for the athlete:
- to achieve the fastest racing times and the highest average boat speed over the rowing distance on the basis of his or her individually available energy potentials at the lowest possible external resistance;
- to achieve the fastest time over a given distance on the basis of his or her individually available biological energy potential and taking into account the biological-conditional objectives for the particular training area at given resistance conditions (boat type, gearing, area of blade, etc.).
Question 2: What research could form the basis for the establishment of a rowing technique for training and competition?
In practice you can find different force-time curves on the oarlock [F=f(t)] with an approximately equal impulse area. These can be classified as shown in Figure 2.
“A” emphasizes the middle of the drive – synchronous force of leg, upper body and arm musculature is dominant. “B” emphasizes the end of the drive – synchronous forces of the upper body and arm musculature is dominant. “C” emphasizes the beginning of the drive – synchronous forces of the leg and upper body musculature is dominant. “D” strongly emphasizes the beginning of the drive with no emphasis on the remainder of the drive.
The strongly schematized force/time curves appear in rowing of all classes, including World and Olympic Champions!
But which of these curves will now be useful? Trying to get the answers from the science of biomechanics alone won’t be enough. The following accounts should give some help in making decisions.
“The work is all the more inefficient the more tension there is in the muscle at the end of the effort, because the work is wasted isometrically, without producing any performance.” (Landois-Rosemann, 1962, p. 504)
“The force/distance curves with a short steep rise to the peak of maximum force and a subsequent flatter fall off the end of the work distance appears to be the most favorable. The effectiveness of the energy turnover for equal work is, in comparison to other curves, the highest, since the necessary energy turnover is the lowest.” (Landois-Rosemann, 1962)
This information disqualifies an orientation towards hard pressure at the finish of the rowing stroke, and it highlights an emphasis on the beginning of the stroke.
“Equal work, realized though extreme tension of the different muscle groups, results in various local loads. The higher loads manifest themselves in the smaller muscle groups (i.e. the legs) and the lower loads in the larger muscle groups (i.e. the legs) (Hollmann/Hettinger, 1976)
From this statement it makes sense to employ a synchronous whole body effort of muscle potentials, taking into account the different force potentials of the leg-, back- and arm muscles. Emphasis on the finish of the stroke should be deemphasized because of the high local load on the arm muscles.
“There are two alternate ways to increase performance (in the mechanical sense, as a product of force and movement velocity): you can increase either the force or the movement velocity. The physiological processes react more strongly to changes in movement velocity than to changes in force.” (Landois-Rosemann, 1962; Roth/Schwanitz/Korner, 1989)
Thus, it makes more sense to improve the time of the movements during the whole drive where the body parts work synchronously. The necessary high velocity on the inboard can be carried out throughout the slower movements of the legs, upper body and arms while they work individually.
“A high force development in the beginning of the rowing stroke seems to be the most effective with regard to the most favorable body position for a proportional development of the force potentials. The position of the body in the beginning of the drive can be compared to the position of a weightlifter at the beginning of the weightlifting process” (Gjessing, 1979)
In light of the previous statement, one should emphasize the beginning of the drive portion of the stroke. Empirical research carried out by this author has produced the following results:
- The average boat speed per stroke rose with the rowers increased force exertion on the inboard at the beginning of the drive;
- The increase in boat speed did not parallel the increase of average force past the 90 degree position of the oar relative to the splashboard;
- The recorded increase of inboard velocity in the area of the drive is therefore mostly a function of higher boat speed initiated by the higher inboard force at the beginning of the drive (Schwanitz, 1975)
Therefore, one can justify an emphasis on the beginning of the drive as well as an orientation towards increasing the force in the middle of the drive and in the finish in order to make use of reserves (Schwanitz, 1976). In the discussion about the effectiveness of the rowing stroke, Nolte (1985) raised the aspect of the hydrodynamic lift, which supports the orientation towards the beginning of the drive.
Summary
From a biomechanical, biological and training-method point of view, there are reasons for an efficient rowing technique that takes into account the aspect of load as well as the propulsive effect during training and competition. The emphasis of the force on the inboard, in order to produce a powerful first part of the drive, characterizes this rowing technique and should be encouraged.
In addition to the emphasis on the first part of the drive, the force on the inboard should be produced in the tangential direction to the inboard, especially before the 90 degree position. A common expression for this force expression should be “row around the oarlock”.
The intention of al training methods is to increase the individual performances in the drive phase. This also covers the common forms of diagnosis used in biomechanics, rowing technique and sports medicine. These usually show the effects of training under defined test conditions.
The increased force exertion and movement velocity as components of the mechanical performance are the correlated partners of the biological and mechanical criteria, with the drive given first priority. Here one should pay attention to the fact that the coordination requirements of the recovery phase are particularly high. In training it is important to carry out a conscious conditioning of the muscles used during the recovery at race intensity to counter conditionally caused coordination problems and to ensure the propulsive effect in the drive by paying special attention to the reversal movement into the entry.
Question 3: What should the coach and athlete know about rowing in different boat classes?
An analysis of training methods with boat measurement technology of FES Berlin in 1978 gave results which later, strengthened the considerations of the rowing federations of the former GDR with regards to decisions about loads. Rowing in different boat types will, under the same training conditions (distance, stroke rate), put different demands on the athlete and result in different loads. A comparative examination of inboard velocities in similar tainting ranges gives the following results:
- Recovery: The profile of the inboard velocity and the time bases approximately match in the various boat classes;
- Drive: As the boat classes get bigger the acceleration on the inboard in the beginning of the stroke increases, and the drive time decreases considerably. (Refer to Table 5.)
Question 4: How does the individual rower deal with the requirements of the specific boat classes?
The research in the biomechanically explained movements of the different boat classes made it possible to qualify the diagnostics of the measurement boats in such a way that that the individual load requirements and effects during training could be clarified, along with the development of rowing technique. This led to an experiment in 1987 carried out by Korner (training methodology), Roth (performance physiology) and Schwanitz (biomechanics).
The object of the experiment was the rower’s mastery of the boat type specific requirements. Four athletes each carried out the following tests in 1x, 2+ and 4+ measuring boats:
- A five step test (one step: three min.);
- one unit of basic endurance training (90min.; stroke rate =20-22)
Inevitably there were the same general requirements (stroke rate, boat velocity) for every step for the four rowers in 4+. However, every rower showed very different realizations of the demands of every load level from the biomechanical point of view. The analysis of the biomechanical parameters shows great dispersion among the rowers at the same load input (between 4 and 25 percent). It was striking that:
- the highest individual deviation in the load steps appeared at lower velocity
- at all load levels the inboard velocity showed the smallest individual deviation, which is mechanically explainable
The overall impression of a team is often formed by that which one can see, such as movements of the body parts relative to each other and to the boat as well as movements of the oars and the boat. In general, one can conclude that:
- The different load demands of each boat class and of each step in the test show very individual results in rowing technique and physiological load.
- In every load of the step test the performance on the inboard as the product of the inboard force and the velocity shows particularly large differences for every rower in all boat classes.
- Performance, force, velocity, lactate and other biological parameters determined as functions of the load in the different boat classes by the same rowers confirm the necessity and the possibility of emphasizing the individual control of performance development my means of biomechanical/rowing technique parameters and characteristics. (See example of this analysis in Fig 4.)
The results of this experiment were used to prepare the athletes of the rowing federation of the former GDR for the 1988 Olympic Games in Seoul. Early in 1988 the women’s sweep rowing team was diagnosed according to this method and given training recommendations, later in June selection tests were carried out to form crews in different boat types.
A basic endurance load test of more than 90minutes at the stroke rate 20-22 showed:
- large differences among rowers in performance, force and velocity on the inboard
- Different amounts of force and velocity among the rowers
- Different lactate concentrations that prevented at least one rower form reaching the biological training goal
As the training progressed all four athletes tended to:
- decrease the inboard velocity during the drive
- increase the inboard velocity during the recovery
- reduce the force on the inboard
- reduce the performance on the inboard during the drive
The following facts can be applied to the examined boat classes:
- depending on the length of time and intensity of the training session on the water, a relatively early tendency of decreased rowing technique was observed;
- The biggest deviations in the technical parameters from rower to rower happened under low intensity training.
These facts strongly support Roth’s demands in 1987 for a transition from methodology/biological training concept to a methodology/biomechanical training concept to improve the performance of the active rowers.
Conclusion
The previous improvements in times and the average boat speed in the finals of top international competition are milestones in the development of rowing performances. They are the result of human factors, developed by training and experience and influenced by non human factors. In terms of Olympic cycles, the relative increases in the average boat speed of 1.5 percent to 2.0 percent are also likely in the future.
The biomechanics of athletic movement based on physical and biological sciences can improve rowing performance, especially in biomechanical/energetic and biological/energetic contexts.
The following two essential tasks should be emphasized:
- the improvement of rowing technique to help the biological/energetic development during training, which leads to a higher boat speed and faster times in competition;
- The examination of movement patterns during competition and training to explain the mechanical causes in biological-conditional effects.
From a biomechanical and biological point, there are reasons for adopting an efficient rowing technique, the most important characteristics of which is the emphasis on the first part of the drive.
In order to perfect the technique and fitness as a synthesis for further improvement in rowing performance, one should find and pay special attention to the specific aspects of each boat class and the individual use of these characteristics.
The conscious use of boat characteristics depends on ones knowledge of rowing in big boats versus small boats. For example, when going from a small boat to a big boat, one experiences:
- reduced drive times;
- increased inboard velocity;
- increased emphasis on the first part of the drive;
- reduced drive-phase proportion in comparison to the whole stroke cycle (changed rhythm relations);
- increased inboard velocity on the performance of the drive
Knowing about the individual characteristics of a certain boat class, one will be able to prescribe the correct work load and gear the athlete in training towards a successful performance.
Diagnostic methods to check certain abilities specific to rowing should allow a variation of the loads that will enable the athlete to reach the limits of his or her current individual ability. It is therefore possible to make low risk assessments of the training effectiveness, and to give recommendations more likely to succeed in the further development of performance.
A diagnosis of the rowing technique should be done along with keeping track of the rowing performance. For this reason it is recommended that you make a system of diagnoses (video analysis, dynamic-graphical measurements, individually or together):
- full stroke cycle and drive portion evaluations;
- competitive evaluations in test and regatta environments;
- Work load evaluations.
Abbreviations
Variables:
P = Performance
F = Force
V = Velocity
T = Time
S = Distance
Indices:
B = Boat
EF = Effective Drive
IH = Inboard part of the oar
FL = Recovery
Z = Rowing Cycle
Example:
PIHZ = average performance (P) on the inboard (IH) of one rowing cycle (Z) in the rowing stroke.
Reference Parameters:
SF = Stroke Rate
GA = Basic Endurance
WSA = Specific Endurance necessary for competition
S = Sprint
WK = Competition
References:
Andrich, B/Buchmann, R/Schwanitz, P: Ansatze fur die Erarbeitung biomechnischer Zweckmassigkeitskriterien sportlicher Bewegungshandlungen in Ausdauersportarten fur Wettkampf und Training. In: Theorie und Praxis der Korperkultur 38(1989) 6, p. 420-422
Gjessing, E: Muskeltatigkeit und Bewegungs verlauf beim Rudern – eine Kraftanalyse. In: FISA Coaches Conference, 1976, p 15-35
Hollanm, W./Hettinger, T.: Sportsmedizin – Arbeits – und Trainings-grundlage. Stutgart, 1980.
Muller: entnomen Landois-Rosemann: Lehrbuch der Physiologie des Menschen. Vol II, Munchen –Berlin, 1962, P 504.
Nolte V.: Die effectivitat des Ruderschlages, Berlin, 1985.
Roth, R./Schwanitz, P./Korer, T.: Untersuchungen zum Freiwasser-Mehr-stufentest in den Messbooten Vierer, Zweier, Einer in funf Geschwindigjeitsstufen. DRSV-intern, Berlin, 1989.
Schwantiz, O.: Ruderspezifische Systembetrachtung und Analyse der Veranderungen Rudertechnischer Parameter in drei Geschwindigkeitsstufen. Dissertation, Humbolt-Universitat in Berlin, 1976.
By Peter Schwanitz (GER)
Translated from German by Lena Baden and Fred Kilgallin
From FISA Coach Vol 2 No 3 Summer 1991
----------------------------
Editors Note: The following is an abbreviated version of the original presentation by Dr. Peter Schwanitz at the 1990 FISA Coaches Conference in Athens. Dr Schwanitz presents recommendations for improving rowing performance based on research conducted at the former East German Sports Science Centre (FES) in Berlin. His analysis is based in part on parameters obtained from boats equipped with biomechanical measuring devices. His primary measurements are the velocity of the inboard of the oar and the force applied to the inboard of the oar. These are simply means to objectively measure characteristics which are usually subjectively determined by the coach. Dr Schwanitz shares the thought provoking findings of his many tests from the 1980’s in the GDR.
Improvement of Rowing Performance
Every rowing race has a winner. The winner the individual or the crew – has rowed the racing distance in the fastest time with the highest average boat speed. The final performances by rowers in the finals of the top international competitions (World Championships and Olympic Games) are the result of important and complex efforts by the rowers and the coaches.
The results make it possible to evaluate, among other thins, the effectiveness of the training, the creatively efficient effort of the athlete during training and competition, and the development of modern materials for the production of boats, oars, and other equipment. In order t draw conclusions about future success in competitive rowing it is important t to have a general idea of the trends in racing times in the finals of previous top international competitions. If this is regarded as a benchmark for the development of performance requirements in rowing, it is important to emphasize that the performance is influenced by two factors: The human factors (personal abilities, fitness, rowing technique, etc.) and the non-human factors (boat, equipment, weather, regatta course, etc).
Three questions about development of performance will be addressed in this section. The answers to these questions are based on the following:
- the winning times of all boat classes for men in the World Championships and the Olympic Games; and
- The results of test races performed in measuring boats by FES – Berlin in cooperation with Humbolt University in Berlin.
Question 1: How has the race performance (boat speed, racing times) developed?
Figure 1 shows the development of the boats speed of winners of the Olympic finals in all men’s boat classes from 1948 to 1988.
Improvement of Rowing Performance
Every rowing race has a winner. The winner the individual or the crew – has rowed the racing distance in the fastest time with the highest average boat speed. The final performances by rowers in the finals of the top international competitions (World Championships and Olympic Games) are the result of important and complex efforts by the rowers and the coaches.
The results make it possible to evaluate, among other thins, the effectiveness of the training, the creatively efficient effort of the athlete during training and competition, and the development of modern materials for the production of boats, oars, and other equipment. In order t draw conclusions about future success in competitive rowing it is important t to have a general idea of the trends in racing times in the finals of previous top international competitions. If this is regarded as a benchmark for the development of performance requirements in rowing, it is important to emphasize that the performance is influenced by two factors: The human factors (personal abilities, fitness, rowing technique, etc.) and the non-human factors (boat, equipment, weather, regatta course, etc).
Three questions about development of performance will be addressed in this section. The answers to these questions are based on the following:
- the winning times of all boat classes for men in the World Championships and the Olympic Games; and
- The results of test races performed in measuring boats by FES – Berlin in cooperation with Humbolt University in Berlin.
Question 1: How has the race performance (boat speed, racing times) developed?
Figure 1 shows the development of the boats speed of winners of the Olympic finals in all men’s boat classes from 1948 to 1988.
If you analyze the average boat speed of all winners of the men’s Olympic Finals (except the 4x) from 1948 (London) to 1988 (Seoul), it is clear that from one Olympic Games to the next, the average boat speed over the racing distance has increased by 1.3 percent.
It is interesting that the development in the average 1st place time corresponds to the relative development in the single sculls. From this one may cautiously draw conclusions about the development of the individual performance.
If this period of time is divided then (see doted lines in Fig 1) from 1948 (London) to 1968 (Mexico) the first place times in an Olympic cycle improved o average 1.9 percent. Winning times in the period since 1968 have improved at a rate greater than the previous period.
The result is that boat velocity, as a mean value for the Olympic winners of all boat classes has increased on average by 1.9 percent in an Olympic cycle. The relationships in velocity between boat classes (mean values) of the winners have stabilized (see Table 1).
Question 2: How are the racing performances in the Olympic cycles of the 1992 and 1996 likely to develop?
Future increases in speed over 2000m have been calculated based on improvements in performances. It should be noted that weather is included as an “average condition”. Therefore the expected improvement implies “average” weather conditions (i.e. calm, small waves etc). For example, for the three boat classes 1x, 2-, and 8+, the improvement in the racing time and the boat speed in the cycles of 1992 and 1996 are clear in Table 2.
Question 3: How are the key technical parameters likely to change in the cycles 1992 and 1996?
Assuming constant stroke rate in the three selected boat classes, the Olympic winner in 1992 and 1996 will have to:
- educe the total number of strokes in the race
- increase the propulsion per stroke in comparison to the winner of 1998 ad 1992 (see Table 3a and 3b)
Assuming constant propulsion in the three boat classes, stroke rates must increase.Now it is interesting to see the consequences of the probable quantitative improvement of important rowing technique parameters and their relative percentage changes (see Table 4). These data were obtained from measurements of the former East German National Team.
In the three boat classes the highest percentage rates of increase in the realized average performance (P) on the inboard (PIH) are shown for:- a rowing cycle (PIHZ)
- The effective drive (PIHEF) in the rowing cycle.
The product of the factors “force on the inboard or inside lever” (FIHEF) and the “velocity of the inboard or inside lever” (VIHEF) with the mechanical performance of the inboard show a minor rate of increase within an Olympic cycle.
In general it should be noted that the increase in boat speed puts demand on the athlete to exert more power on the inboard and to attain a higher velocity on the inboard.
Applying Interdisciplinary Contributions to Improve Performance
The definition of biomechanics can be described as the effects of mechanical laws on and in the living organism and their mechanically measurable reactions of the organism to these effects.
Thus biomechanics has its basis in both the physical and biological sciences. Therefore, one should not depend solely on mechanical findings to determine how to achieve competitive goals, (victory, bets possible result, faster, etc)
This knowledge must be translated for use in interdisciplinary synthesis and an application oriented training plan. The following four questions and their answers attempt to substantiate this claim.
Question 1: What are the possibilities and limitations of the contributions of biomechanics to the sport of rowing?
The essential focus of biomechanics in rowing has and always will be rowing technique
Most objectives of biomechanical research are to explain the propulsion-causing powers and accelerations of the rowing stroke during competitions, both in theory and in practice. This research also tries to explain the effects of the development of equipment.
Theoretically explained biomechanical knowledge and the empirical findings that create successful rowers are the bases for forming a technical concept. The application of the concept has contributed to the improvement of rowing performance.
The biomechanics of athletic movements in the endurance sport of rowing can improve performance, especially if it considers biomechanical/energetic and biological/energetic interactions. The task in this connection is:
- to investigate the movement sequences during competition and training in order to explain those mechanical causes that influence the biological/conditional effects;
- To develop rowing technique as a biomechanical solution process that can be applied to the effective biological/energetic development in training as well as result in higher speed during races.
It is important to develop and identify rowing technique from a biomechanical perspective, which makes it possible for the athlete:
- to achieve the fastest racing times and the highest average boat speed over the rowing distance on the basis of his or her individually available energy potentials at the lowest possible external resistance;
- to achieve the fastest time over a given distance on the basis of his or her individually available biological energy potential and taking into account the biological-conditional objectives for the particular training area at given resistance conditions (boat type, gearing, area of blade, etc.).
Question 2: What research could form the basis for the establishment of a rowing technique for training and competition?
In practice you can find different force-time curves on the oarlock [F=f(t)] with an approximately equal impulse area. These can be classified as shown in Figure 2.
“A” emphasizes the middle of the drive – synchronous force of leg, upper body and arm musculature is dominant. “B” emphasizes the end of the drive – synchronous forces of the upper body and arm musculature is dominant. “C” emphasizes the beginning of the drive – synchronous forces of the leg and upper body musculature is dominant. “D” strongly emphasizes the beginning of the drive with no emphasis on the remainder of the drive.
The strongly schematized force/time curves appear in rowing of all classes, including World and Olympic Champions!
But which of these curves will now be useful? Trying to get the answers from the science of biomechanics alone won’t be enough. The following accounts should give some help in making decisions.
“The work is all the more inefficient the more tension there is in the muscle at the end of the effort, because the work is wasted isometrically, without producing any performance.” (Landois-Rosemann, 1962, p. 504)
“The force/distance curves with a short steep rise to the peak of maximum force and a subsequent flatter fall off the end of the work distance appears to be the most favorable. The effectiveness of the energy turnover for equal work is, in comparison to other curves, the highest, since the necessary energy turnover is the lowest.” (Landois-Rosemann, 1962)
This information disqualifies an orientation towards hard pressure at the finish of the rowing stroke, and it highlights an emphasis on the beginning of the stroke.
“Equal work, realized though extreme tension of the different muscle groups, results in various local loads. The higher loads manifest themselves in the smaller muscle groups (i.e. the legs) and the lower loads in the larger muscle groups (i.e. the legs) (Hollmann/Hettinger, 1976)
From this statement it makes sense to employ a synchronous whole body effort of muscle potentials, taking into account the different force potentials of the leg-, back- and arm muscles. Emphasis on the finish of the stroke should be deemphasized because of the high local load on the arm muscles.
“There are two alternate ways to increase performance (in the mechanical sense, as a product of force and movement velocity): you can increase either the force or the movement velocity. The physiological processes react more strongly to changes in movement velocity than to changes in force.” (Landois-Rosemann, 1962; Roth/Schwanitz/Korner, 1989)
Thus, it makes more sense to improve the time of the movements during the whole drive where the body parts work synchronously. The necessary high velocity on the inboard can be carried out throughout the slower movements of the legs, upper body and arms while they work individually.
“A high force development in the beginning of the rowing stroke seems to be the most effective with regard to the most favorable body position for a proportional development of the force potentials. The position of the body in the beginning of the drive can be compared to the position of a weightlifter at the beginning of the weightlifting process” (Gjessing, 1979)
In light of the previous statement, one should emphasize the beginning of the drive portion of the stroke. Empirical research carried out by this author has produced the following results:
- The average boat speed per stroke rose with the rowers increased force exertion on the inboard at the beginning of the drive;
- The increase in boat speed did not parallel the increase of average force past the 90 degree position of the oar relative to the splashboard;
- The recorded increase of inboard velocity in the area of the drive is therefore mostly a function of higher boat speed initiated by the higher inboard force at the beginning of the drive (Schwanitz, 1975)
Therefore, one can justify an emphasis on the beginning of the drive as well as an orientation towards increasing the force in the middle of the drive and in the finish in order to make use of reserves (Schwanitz, 1976). In the discussion about the effectiveness of the rowing stroke, Nolte (1985) raised the aspect of the hydrodynamic lift, which supports the orientation towards the beginning of the drive.
Summary
From a biomechanical, biological and training-method point of view, there are reasons for an efficient rowing technique that takes into account the aspect of load as well as the propulsive effect during training and competition. The emphasis of the force on the inboard, in order to produce a powerful first part of the drive, characterizes this rowing technique and should be encouraged.
In addition to the emphasis on the first part of the drive, the force on the inboard should be produced in the tangential direction to the inboard, especially before the 90 degree position. A common expression for this force expression should be “row around the oarlock”.
The intention of al training methods is to increase the individual performances in the drive phase. This also covers the common forms of diagnosis used in biomechanics, rowing technique and sports medicine. These usually show the effects of training under defined test conditions.
The increased force exertion and movement velocity as components of the mechanical performance are the correlated partners of the biological and mechanical criteria, with the drive given first priority. Here one should pay attention to the fact that the coordination requirements of the recovery phase are particularly high. In training it is important to carry out a conscious conditioning of the muscles used during the recovery at race intensity to counter conditionally caused coordination problems and to ensure the propulsive effect in the drive by paying special attention to the reversal movement into the entry.
Question 3: What should the coach and athlete know about rowing in different boat classes?
An analysis of training methods with boat measurement technology of FES Berlin in 1978 gave results which later, strengthened the considerations of the rowing federations of the former GDR with regards to decisions about loads. Rowing in different boat types will, under the same training conditions (distance, stroke rate), put different demands on the athlete and result in different loads. A comparative examination of inboard velocities in similar tainting ranges gives the following results:
- Recovery: The profile of the inboard velocity and the time bases approximately match in the various boat classes;
- Drive: As the boat classes get bigger the acceleration on the inboard in the beginning of the stroke increases, and the drive time decreases considerably. (Refer to Table 5.)
Question 4: How does the individual rower deal with the requirements of the specific boat classes?
The research in the biomechanically explained movements of the different boat classes made it possible to qualify the diagnostics of the measurement boats in such a way that that the individual load requirements and effects during training could be clarified, along with the development of rowing technique. This led to an experiment in 1987 carried out by Korner (training methodology), Roth (performance physiology) and Schwanitz (biomechanics).
The object of the experiment was the rower’s mastery of the boat type specific requirements. Four athletes each carried out the following tests in 1x, 2+ and 4+ measuring boats:
- A five step test (one step: three min.);
- one unit of basic endurance training (90min.; stroke rate =20-22)
Inevitably there were the same general requirements (stroke rate, boat velocity) for every step for the four rowers in 4+. However, every rower showed very different realizations of the demands of every load level from the biomechanical point of view. The analysis of the biomechanical parameters shows great dispersion among the rowers at the same load input (between 4 and 25 percent). It was striking that:
- the highest individual deviation in the load steps appeared at lower velocity
- at all load levels the inboard velocity showed the smallest individual deviation, which is mechanically explainable
The overall impression of a team is often formed by that which one can see, such as movements of the body parts relative to each other and to the boat as well as movements of the oars and the boat. In general, one can conclude that:
- The different load demands of each boat class and of each step in the test show very individual results in rowing technique and physiological load.
- In every load of the step test the performance on the inboard as the product of the inboard force and the velocity shows particularly large differences for every rower in all boat classes.
- Performance, force, velocity, lactate and other biological parameters determined as functions of the load in the different boat classes by the same rowers confirm the necessity and the possibility of emphasizing the individual control of performance development my means of biomechanical/rowing technique parameters and characteristics. (See example of this analysis in Fig 4.)
The results of this experiment were used to prepare the athletes of the rowing federation of the former GDR for the 1988 Olympic Games in Seoul. Early in 1988 the women’s sweep rowing team was diagnosed according to this method and given training recommendations, later in June selection tests were carried out to form crews in different boat types.
A basic endurance load test of more than 90minutes at the stroke rate 20-22 showed:
- large differences among rowers in performance, force and velocity on the inboard
- Different amounts of force and velocity among the rowers
- Different lactate concentrations that prevented at least one rower form reaching the biological training goal
As the training progressed all four athletes tended to:
- decrease the inboard velocity during the drive
- increase the inboard velocity during the recovery
- reduce the force on the inboard
- reduce the performance on the inboard during the drive
The following facts can be applied to the examined boat classes:
- depending on the length of time and intensity of the training session on the water, a relatively early tendency of decreased rowing technique was observed;
- The biggest deviations in the technical parameters from rower to rower happened under low intensity training.
These facts strongly support Roth’s demands in 1987 for a transition from methodology/biological training concept to a methodology/biomechanical training concept to improve the performance of the active rowers.
Conclusion
The previous improvements in times and the average boat speed in the finals of top international competition are milestones in the development of rowing performances. They are the result of human factors, developed by training and experience and influenced by non human factors. In terms of Olympic cycles, the relative increases in the average boat speed of 1.5 percent to 2.0 percent are also likely in the future.
The biomechanics of athletic movement based on physical and biological sciences can improve rowing performance, especially in biomechanical/energetic and biological/energetic contexts.
The following two essential tasks should be emphasized:
- the improvement of rowing technique to help the biological/energetic development during training, which leads to a higher boat speed and faster times in competition;
- The examination of movement patterns during competition and training to explain the mechanical causes in biological-conditional effects.
From a biomechanical and biological point, there are reasons for adopting an efficient rowing technique, the most important characteristics of which is the emphasis on the first part of the drive.
In order to perfect the technique and fitness as a synthesis for further improvement in rowing performance, one should find and pay special attention to the specific aspects of each boat class and the individual use of these characteristics.
The conscious use of boat characteristics depends on ones knowledge of rowing in big boats versus small boats. For example, when going from a small boat to a big boat, one experiences:
- reduced drive times;
- increased inboard velocity;
- increased emphasis on the first part of the drive;
- reduced drive-phase proportion in comparison to the whole stroke cycle (changed rhythm relations);
- increased inboard velocity on the performance of the drive
Knowing about the individual characteristics of a certain boat class, one will be able to prescribe the correct work load and gear the athlete in training towards a successful performance.
Diagnostic methods to check certain abilities specific to rowing should allow a variation of the loads that will enable the athlete to reach the limits of his or her current individual ability. It is therefore possible to make low risk assessments of the training effectiveness, and to give recommendations more likely to succeed in the further development of performance.
A diagnosis of the rowing technique should be done along with keeping track of the rowing performance. For this reason it is recommended that you make a system of diagnoses (video analysis, dynamic-graphical measurements, individually or together):
- full stroke cycle and drive portion evaluations;
- competitive evaluations in test and regatta environments;
- Work load evaluations.
Abbreviations
Variables:
P = Performance
F = Force
V = Velocity
T = Time
S = Distance
Indices:
B = Boat
EF = Effective Drive
IH = Inboard part of the oar
FL = Recovery
Z = Rowing Cycle
Example:
PIHZ = average performance (P) on the inboard (IH) of one rowing cycle (Z) in the rowing stroke.
Reference Parameters:
SF = Stroke Rate
GA = Basic Endurance
WSA = Specific Endurance necessary for competition
S = Sprint
WK = Competition
References:
Andrich, B/Buchmann, R/Schwanitz, P: Ansatze fur die Erarbeitung biomechnischer Zweckmassigkeitskriterien sportlicher Bewegungshandlungen in Ausdauersportarten fur Wettkampf und Training. In: Theorie und Praxis der Korperkultur 38(1989) 6, p. 420-422
Gjessing, E: Muskeltatigkeit und Bewegungs verlauf beim Rudern – eine Kraftanalyse. In: FISA Coaches Conference, 1976, p 15-35
Hollanm, W./Hettinger, T.: Sportsmedizin – Arbeits – und Trainings-grundlage. Stutgart, 1980.
Muller: entnomen Landois-Rosemann: Lehrbuch der Physiologie des Menschen. Vol II, Munchen –Berlin, 1962, P 504.
Nolte V.: Die effectivitat des Ruderschlages, Berlin, 1985.
Roth, R./Schwanitz, P./Korer, T.: Untersuchungen zum Freiwasser-Mehr-stufentest in den Messbooten Vierer, Zweier, Einer in funf Geschwindigjeitsstufen. DRSV-intern, Berlin, 1989.
Schwantiz, O.: Ruderspezifische Systembetrachtung und Analyse der Veranderungen Rudertechnischer Parameter in drei Geschwindigkeitsstufen. Dissertation, Humbolt-Universitat in Berlin, 1976.
Force Application during the Drive Phase
Force Application during the Drive Phase
It is also important, that the first crew increases the force by means of faster leg drive, good connection with the trunk work and more horizontal and shallower blade path:
As the consequence, the handle velocity of the first crew increases at catch up to higher value and maintain it longer during the drive:
The boat speed and acceleration curves of the first crew have deeper negative peak at catch (7.6 and 7.1 m/s2), but much quicker increase afterwards.
This creates faster moving support on the stretcher and helps to accelerate rower’s centre of mass (RBN 1/2004):
We can figure out three main reasons of higher efficiency and better performance of the first crew:
- Higher power production due to higher handle speed and in spite of lower force application (4.06 and 3.83 W/kg, 5.6% difference equal to 6s gain over 2000m);
- Lower fluctuations of the boat speed (deviations were 0.70 and 0.72 m/s), which cause higher boat velocity efficiency (98.17% and 97.64%, 2s faster over 2000m);
- Lower inertial losses caused by lower fluctuations of the rower’s CM speed (9.4% and 11.4%, 2s faster over 2000m).
Finally, the overall gain due to better technique of the first crew was approximately 10s over 2000, which was nearly equal to the margin between two crews in the race.
By Valery Kleshnev
Rowing Biomechanics Newsletter No2 Volume 4 February 2004
Rowing Biomechanics Newsletter No2 Volume 4 February 2004
--------------------------
… increasing the force faster at catch is very important for achieving efficient rowing technique? Below are force curves (as a ratio to body mass) of two crews, where the crew 1 increases the force much quicker than the crew 2, but crew 1 has relatively lower maximal (7.27 and 8.84 N/kg, correspondingly) and average (3.84 and 4.09 N/kg) force application:
It is also important, that the first crew increases the force by means of faster leg drive, good connection with the trunk work and more horizontal and shallower blade path:As the consequence, the handle velocity of the first crew increases at catch up to higher value and maintain it longer during the drive:
The boat speed and acceleration curves of the first crew have deeper negative peak at catch (7.6 and 7.1 m/s2), but much quicker increase afterwards.
This creates faster moving support on the stretcher and helps to accelerate rower’s centre of mass (RBN 1/2004):
We can figure out three main reasons of higher efficiency and better performance of the first crew:
- Higher power production due to higher handle speed and in spite of lower force application (4.06 and 3.83 W/kg, 5.6% difference equal to 6s gain over 2000m);
- Lower fluctuations of the boat speed (deviations were 0.70 and 0.72 m/s), which cause higher boat velocity efficiency (98.17% and 97.64%, 2s faster over 2000m);
- Lower inertial losses caused by lower fluctuations of the rower’s CM speed (9.4% and 11.4%, 2s faster over 2000m).
Finally, the overall gain due to better technique of the first crew was approximately 10s over 2000, which was nearly equal to the margin between two crews in the race.
Subscribe to:
Posts (Atom)